How to Install an Electric Dog Fence

Installing an invisible fence is a relatively simple DIY project and can save you a lot of money. The procedure is straightforward and requires drilling tools, but things can get tricky if you have to walk through concrete barriers such as driveways. You must follow the instructions that came with the model you purchased. Most installations follow the necessary steps outlined here.

Before you begin, it is advisable to create a drawing of the fence’s layout that includes all the landscape’s essential features. The nature of your garden can influence how you draw your underground boundaries.

How to Install an Electric Dog Fence

Things you need for installation

  • Pen and paper
  • Wireless fence kit with wire
  • Tape measure
  • Drill
  • Wire stripper
  • Spade
  • Spline tool
  • Circular saw with masonry blade (if needed)

Step-1 Call to 811

All states have services that provide details of buried utilities and telecommunications lines that may be buried on your property. Call 811 to access this service. Don’t make a definitive plan until you know these details.

Step-2 Sketch Your Yard and Invisible Fence Design

Describe the garden on a piece of paper, including all of the landscape and landscape features you will encounter when laying wire fencing. Remember to include the location of the buried power cable. Design the layout of the fence to avoid obstacles, mainly underground wires. If the fence line is parallel to the utility line, do not separate it more than 10 feet to prevent electrical interference. When crossing underground cables at a fence, cross them at a 90-degree angle. Select a location for the transmitter in a dry indoor place, such as a garage or utility area.

Step-3 Take measurements and buy cables.

Measure the amount of wire needed to lay the fence using a tape measure in the garden or by estimating the distance from the figure. Buy about 20% more yarn than required.

Step-4 Arrange the wires and connect them to the transmitter.

Most systems require the two wires to be laid side by side. Place them all around the area you want to fence, but don’t fill them in yet. Place them on the floor and feed the ends of the wires inside to the transmitter. You may need to drill holes in the siding or foundation to allow the wire to pass through. Strip about 3/4 inch of insulation from the wire’s end and insert the wires back into the transmitter’s terminal to connect the wire.

Step-5 Connect the transmitter and test the fence.

Connect the transmitter to a GFCI wall outlet. Go around the fence with your dog collar and get an audible or visual signal when you are close enough to trigger the dog collar. Go home and make sure the signal isn’t reaching anywhere inside. In this case, keep the wire away from your house.

Step-6 Bury the Wire

When you are satisfied with the wiring layout, use a shovel or similar drilling tool to create a 2-inch deep groove in the ground along the fence wire path. Use a spline tool to push the wire into the trench, backfill it, and walk over the channel to compress the soil.

If the wire needs to pass through the concrete’s surface and cannot be given underneath, it will need to be grooved with a circular saw and a stone blade, the wire inside, and then repaired with a concrete patch.

Step-7 Train Your Pet

Even after installing the fence wire, your pet should be trained to respect the fence’s boundaries. Fence installation kits usually carry a small flag for this purpose. Follow the container’s directions to line up the fence flags long enough to trigger an audible alert on the collar. After being shocked often enough, the animal learns to associate the beeping with the shock and stops venturing through the flag. Finally, you can remove the flag.

How Electric Dog Fence Works

Electronic Pet Containment is a dog training system that uses a small amount of charge to keep a dog in the yard. The transmitter is plugged into a standard outlet and emits a signal that travels along with underground wiring. A hidden border is created, and the dog collar receiver issues a warning when the dog walks near the border.

If the dog does not return, the receiver will respond with a gentle but precise static correction. It’s harmless but uncomfortable enough for the dog to learn new custom boundaries and stay in the safe part of the yard.

The boundaries you set are invisible to anyone, but your dog knows they are there. You can use these systems to create boundaries that your dog cannot cross or dig. It is also used to keep dogs away from flower beds and swimming pools or lock them up in their yards.

The load, dog’s load the dog, feels from the collar receiver is slightly stronger than the shock it receives from static electricity. It is designed to grab the dog’s attention so as not to hurt the dog. And once trained, your dog responds to vocal cues and rarely experiences shock.

You may click here: How to Build Dog Fence

Benefits of installation electric dog fence

Electric dog fences have many advantages. The first is that it is much less visible than traditional chains and wooden fences. You can give your dog a border without breaking the garden landscape or staring at the ugly wall every time you look out the window.

Electric fences are also much cheaper than traditional fences. Electric fences can be returned between $ 100 and $ 400, or up to $ 800 if professionally installed, much cheaper than $ 5,000 for chains and wood fences. Electric dog fences are also easier to maintain than traditional fences and are better designed for weather conditions. Wood fencing may not withstand a storm, but electric fencing underground wiring is safe.

They are also inexpensive to repair and sometimes you may need to check the electrical system and replace the transmitter battery, but it’s much easier than replacing wood or metal with a more traditional fence.

One of the most important advantages of electric fencing is that dogs are free to play. Not only will you be healthy and happy with the space in which you can run and exercise without being trapped inside or in a cage, but as the owner you are safe in the pool. Outside without having to monitor every movement. You can have a sense of security that you have. You can also prevent others from hitting other people’s backyards, which can make them intolerant of their own animals.

Leave a Comment